GPS and Telematic Technology: The Next Evolution in Theft Protection

//GPS and Telematic Technology: The Next Evolution in Theft Protection

GPS and Telematic Technology: The Next Evolution in Theft Protection

In regards to protecting precious construction equipment and trucks, there are two primary approaches: prevention and retrieval. The former is the strategy that is favorable since it considerably reduces potential damage to the asset in addition to eliminates. Unfortunately and too often, contractors wait before beginning to consider implementing a theft security plan, till something is stolen. This article’s objective is both to teach the benefits of asset tracking for theft security and how it functions and to show that when it comes to theft, an ounce of prevention is definitely worth a pound of cure.

With industry deficits exceeding $1 billion annually from the USA, equipment owners are turning to technology to curtail this fast outbreak. GPS monitoring, one component of the broader technology called”telemetry”, is rapidly becoming the advanced way of choice. Many equipment owners are aware of and assessing systems on the merits of their productivity-enhancing, support management, and capabilities. The technology has been around longer for trucks, yielding benefits such as gas savings, increased driver liability and vehicle life. The additional bonus is that the theft protection component, which any savvy fleet supervisor must include in their assessment of the technology.

To better understand how to combat theft with GPS and asset tracking, we first must explore why it is so easy to slip trucks and equipment by comparing and contrasting them:

1. Easy Access – Since the equipment is universally keyed, a key begins any machine from the manufacturer. Unfortunately, these keys can be got by any burglar in the world at a nearby dealership or even simpler, online. Since the equipment is literally sitting on the side of the road or behind a chain-link fence, all the crooks have to do is hop in and drive off. Though chain link fences were a sufficient deterrent, thieves today jump over them, drive the machine and load the equipment in the street. The average construction equipment theft takes about twenty minutes.

For trucks, the theft happens in a matter of minutes using a fast break in and hotwire. Vehicle theft is frequently more brazen: we’ve client stories (before installing a monitoring solution) of trucks being stolen from a diner parking lot while the driver was inside eating and in other instances even while the trucks idled unattended in the morning to heat up.

2. Delay in Discovery – Equipment can sit for days at a time without anybody touching it, but presumed to be in the same location. Thieves are intelligent and will frequently steal or over a weekend, realizing that nobody will probably return to the job site until Monday morning. This provides them a few days head start before the theft is even discovered.

Since trucks are an integral component of transportation, their theft typically comes to light within a couple of hours of the disappearance.

3. Difficulty in Retrieval – Stolen equipment is readily transferred out of the nation or resold on the market block into an unsuspecting buyer, yet retained whole for the part. Organized crime rings are getting to be even worse, and the major players, a number of thieving organizations post the recovery rate for equipment at a mere 20 percent. Xeos Technologies | Marine Telemetry Tracking Equipment And Solutions | Xeostech

A thief’s modus operandi with trucks, notably service trucks, would be to loot the vehicle for tools and parts. Trucks have a greater healing rate but are often found abandoned, and stripped of everything valuable. We have even seen stolen trucks used only to commit other crimes, like cars or transporting contraband.

The crooks can quickly get to your assets, begin them just as easily and get a significant head start. The deck is clearly stacked in the burglars’ favor, but you have an opportunity to swing the advantage back.

Locking down it

Prevention is your preferred way of protecting against theft. Besides reducing damage and preventing spending hours coordinating a restoration effort, prevention methods prevent the thieves from moving your resources at unauthorized times. To implement a preventive strategy, the facets of this GPS tracking technology get involved. Xeos

Since equipment theft normally happens after hours or on weekends when witnesses are not as likely, a GPS unit will establish a curfew in your equipment at that time. What that means is that the unit will call your mobile phone, pager, PDA or drop you an email if somebody attempts to begin the device or moves it. The machine can also go as far as to automatically disable the equipment out of running at that moment. It is all based around your schedule of operation, and if you ever require the machine during those off hours login to the program lift the curfew.

Let’s say you routinely want your machinery available to run out of 7 a.m. to 7 Monday through Saturday, with Sunday off. At 7 PM each night and all day Sunday your machines will automatically disable them and call you if someone touches the switch or handles to move the equipment. At 7 a.m., everything goes back to normal and no one is the wiser. If you want that piece to operate until 10 PM, only login online and 30 seconds after your machine is enabled to run. If you understand an advantage will sit for a period or goes missing, then log in and place the curfew remain disabled until you tell it differently and to disable instantly. From some other Internet-connected computer or PDA anywhere in the world, you are in control to close down your resources at any time. This powerful feature is particularly useful within the long holiday weekends when resources are currently sitting and thieves are on the prowl.

By | 2019-04-24T08:08:06+00:00 April 10th, 2019|Business|Comments Off on GPS and Telematic Technology: The Next Evolution in Theft Protection

About the Author: